Getting Started; Starting Studio Manager; Quitting Studio Manager; Configuring Studio Manager - Yamaha 02R96 Owner's Manual

1
Chapter 1—Getting Started

1 Getting Started

Starting Studio Manager

Windows: Click the Start button and then click Programs–>YAMAHA Studio Manager for
02R96–>Studio Manager for 02R96.
Macintosh: Open the Studio Manager for 02R96 folder and double-click "SM_02R96."
If a 02R96 is detected while Studio Manager starts up, the Synchronization dialog box
appears, from which you can choose to transfer the settings of the 02R96 to Studio Manager
or vice versa. See "Synchronizing Studio Manager" on page 3 for more information. If no
02R96 is detected, a new Console window opens.

Quitting Studio Manager

Choose Exit (Quit on the Macintosh) from the File menu.
If there are no unsaved changes, all windows close and Studio Manager quits. If there are
unsaved changes, a message asking if you want to save the changes appears. Click Yes to save
the changes and quit, click No to quit, or click Cancel to cancel the operation. Studio Man-
ager can also be quit by clicking the Console window's Close button.
Configuring Studio Manager
Selecting Ports
In order to use Studio Manager, you must specify the input and output ports that Studio
Manager should use to communicate with the 02R96.
Windows: Choose System Setup from the File menu, and specify the input and output ports
on the Setup dialog box, as shown below.
Macintosh: Choose Select OMS Ports from the File menu, and specify the input and output
ports (device names set in OMS Studio Setup) on the Setup dialog box, as shown below.
Note: Choose OMS MIDI Setup from the File menu, and make sure that the "Run MIDI in
Background" option is on.
OMS Studio Setup can be opened directly from Studio Manager by selecting OMS Studio
Setup from the File menu.
Studio Manager for 02R96—Owner's Manual
The ONLINE indicator is displayed while Studio Manager is connected to a
02R96. When no 02R96 is detected, the OFFLINE indicator is displayed.