Handwheel
Pattern selection dial and
stitch length dial
Stitch length dial
Turn the dial to adjust the stitch length.
If a larger number is aligned with the mark above the
dial, the stitch length becomes longer. If a smaller
number is aligned with the mark above the dial, the
stitch length becomes shorter.
Longer
Pattern selection dial
Turn the dial until the desired pattern is aligned with the mark above the
dial.
To sew patterns A to K, turn the dial until
above the dial.
To sew patterns L to S, turn the dial until
above the dial.
•
Use the handwheel to manually raise and lower the needle.
Note:
Always turn the handwheel towards yourself (in the
direction of the arrow).
If the handwheel is turned in the opposite direction,
the thread may become tangled.
Mark above dial
Shorter
Model XXX34
Reverse sewing lever
•
Press down the reverse lever, when sewing in
reverse.
•
Remove your finger from the reverse sewing
lever to return to forward direction sewing.
For operating details,
refer to pages 23 - 25.
Short
Longer
Model XXX26
is aligned with the mark
is aligned with the mark
1
Long
Shorter
9