Setting Up The Projector - Sanyo PLC-WXU700A Owner's Manual

Multimedia projector

Hide thumbs Also See for PLC-WXU700A:

Table of Contents

Setting up the projector

Click Setting on the main menu. This function is to set up the projector. Select the

sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting.

Screen........................Switches the screen mode. There may not be available

The mark " " indicates the available screen mode in the selected input

source system. The error message appears when the disabled screen mode

indicated with "*" is selected.

mode depending on the input mode as shown in the

table below.

Input source

Natural wide

Setting up the projector

Table of Contents