Operation During Image Viewer In The Manual/Program Mode; Operation During Playback Movie File; Termination Of Memory Viewer - Sanyo PLC-WXU700A Owner's Manual

Operation during image viewer in the manual/program mode

During displaying the image, you can control the displayed image with control buttons as described in
the table below.
Point Operation
Manual playback with previous file
Manual playback with next file
Start auto-playback* (program mode), or scroll down during displaying the text file*
Stop auto-playback* (program mode), or scroll up during displaying the text file*
* The display time of the image and the number of repeat at the auto-playback mode are set up
from the "Set" menu on the browser window. (p.7)
* The scrolling of the text file can be operated only in the manual mode.

Operation during playback movie file

During the playback of the movie files, by the following number of times pressing the point buttons,
you can pause, review or forward the playback.
Point
or x1/2/3/4
X 4
Review Review
in 8 in 4
double double
speed speed

Termination of memory viewer

To terminate the memory viewer function, take one of methods described below.
- Terminate with projector's on-screen menu.
1. Select "Wired" or "Wireless" from the input menu of the projector. Press SELECT button.
2. Select "Memory Viewer" with the point
of the memory viewer appears.
3. Select "Exit" and press SELECT button.
- Terminate with memory viewer mode
1. During the image displaying, press AUTO SET/CANCEL button. The browser window appears on the
screen.
2. Press AUTO SET/CANCEL button again. The cursor moves to menu item.
3. Select "Exit" on the browser window with the point
Operation
Manual playback with previous file
Manual playback with next file
See the figure below
X3 X 2 X1
Review Pause
in 2
double
speed
X 1
Forward Forward
normal in 2
speed double
speed
buttons and press SELECT button. The "Enter/Exit" pallet
buttons and press SELECT button.
X 2 X 3
Forward Forward
in 4 in 8
double double
speed speed
9