Formatting The Usb Thumb Drive - Sanyo PLC-WXU700A Owner's Manual

* The data converted by the Network Viewer 5 [File Converter1] can be stored into the USB thumb drive
mounted on the projector directly. For further information, refer to chapter Network Viewer function,
"Setting of output destination and conversion mode" (p.117) described on the separated Network
Owner's manual for Windows.
* The program file created by the Program Editor can be stored into the USB thumb drive mounted on
the projector directly. For further information, refer to chapter Network Viewer function, "Creating a
program file" (p.119) described on the separated Network Owner's manual for Windows.

Formatting the USB thumb drive

A new USB thumb drive or a USB thumb drive formatted by computer or camera must be formatted by
this product. Memory Viewer function may not operate properly with a USB thumb drive formatted by
other equipment.
1. In the memory viewer mode, press AUTO SET/CANCEL button. The browser window appears on the
screen.
2. Press AUTO SET/CANCEL button again. The cursor moves to menu item.
3. Select "Format" from "Menu" with the point buttons and press SELECT button. The format
confirmation window appears.
4. Select "Yes" with the point buttons and press SELECT button to start formatting. It takes about 1-2
seconds to complete the formatting.
Note:
During formatting the USB thumb drive, do not turn off the power or eject the USB thumb drive
because the data in the USB thumb drive might get damaged. During formatting, the USB thumb
drive is blinking.
11