Table of Contents
Advertisement
Solving Problems
If you have a problem with your Stylus CX6300, check the messages on the LCD
screen, run a nozzle check (see page 33), or see "Problems and Solutions" below.
For problems with scanning or printing from your computer, double-click the
CX6300 Reference Guide icon on your computer desktop.
See these sections:
"Problems and Solutions" (below)
"Where To Get Help" on page 41
Problems and Solutions
Check the solutions below if you're having trouble using your CX6300 in
stand-alone mode.
Copying Problems
Make sure your paper is positioned on the right side of the sheet feeder with
the left edge guide lightly against its left side. Don't load paper above the
arrow on the left edge guide.
Make sure your paper is loaded short edge first.
Make sure your original is positioned in the top left corner of the glass, with
the short edge at the left. Place it approximately 3 mm (
edge of the glass to avoid cropping.
Make sure you select the copy layout you want. See page 14 for instructions.
If you select
Auto Fit Page
edges, the original size may not be recognized correctly. Select
Reduce/Enlarge setting and use the Optional Zoom setting to adjust the size
of your copy.
to copy a document with white or very light
1
/
inch) from the
8
as the
Actual
Solving Problems
39
Advertisement
Table of Contents
