Table of Contents
Advertisement
Scanning to a Card
Follow these steps to scan an image to a memory card and save it in JPEG format:
1. Make sure your CX6300 is not connected to your computer (or your
computer is turned off ), then insert a memory card (see page 20).
Note:
If the card is not properly formatted, you see a message on the LCD screen. Press
the button indicated on the screen to format the card. Any data stored on the card
will be erased.
2. Press the
Scan
3. Press the green button next to the LCD screen until
then press
OK
Note:
You can also scan to your computer or create an e-mail with the scanned image
attached. Select either To PC or To E-mail, then see your online Reference Guide
for details.
4. Select the document type (
).
Graphic
5. Select
as the scan area. (If the edges
Auto
of your document are light in color, the
CX6300 may not be able to detect them
and part of your image may be cut off; in
that case, select
area.)
6. For ordinary documents, select
as the quality of the scanned image. For
higher quality, select either
(for text) or
Graphic
Note:
Higher-quality images take up more memory card space.
7. Press the button next to
8. Make sure your original document is placed on the scanner, then press the
button to start scanning. Your image is saved to the "epscan" folder on
Color
the memory card.
button to enter Scan Mode.
.
Text
to scan the entire
Max.
Normal
Fine
(for photos).
(shown on the LCD screen).
OK
or
Document type
Image quality
appears,
To Photo Card
Scan area
Scanning to a Card
31
Advertisement
Table of Contents
