Table of Contents
Advertisement
3. Close the scanner lid.
4. Press the
5. The default copy settings are displayed on the LCD screen. Change any
necessary copy settings, as described in "Changing Copy Settings" (below).
6. Press the
black-and-white copies). Your document is scanned and then printed. If you're
using the
follow the instructions on the LCD screen to scan additional sheets.
Caution:
Never open the scanner section while scanning or copying, or you could damage the
CX6300.
Changing Copy Settings
The current copy settings are shown on the LCD screen. You can change the
settings as described below.
Copy Mode button
Note:
You can save the current copy settings (except for the number of copies) by pressing
the Save button for 3 seconds until you see the message "Stored" on the screen. To
recall these settings, press and hold the Recall button for 3 seconds.
To clear your settings and return the CX6300 to its default settings, press and hold the
Reset button for 3 seconds.
14
Copying
button to enter Copy Mode.
Copy
button (to make color copies) or
Color
or
Copy Layout setting (see "Copy Layout" on page 17),
2-up
4-up
Paper type
Print quality
Menu selection buttons
button (to make
B&W
Reduce/enlarge
Paper size
Number of copies
Advertisement
Table of Contents
