Changing Copy Settings - Epson STYLUS CX6500 Quick Reference Manual

3. Close the scanner lid.
4. Press the
Copy
5. The default copy settings are displayed on the LCD screen. Change any
necessary copy settings, as described in "Changing Copy Settings" below.
6. Press the x
Color
make black-and-white copies). Your document is scanned then printed. If
you're using the
page 16), follow the instructions on the LCD screen to scan additional sheets.
Caution:
Never open the scanner while scanning or copying, or you could damage the
CX6500.

Changing Copy Settings

The current copy settings are shown on the LCD screen. You can change the
settings as described below.
Copy Mode button
Print quality
Note:
You can save the current copy settings (except for the number of copies) by pressing
the Save button for 3 seconds until you see the message "Stored" on the screen. To
recall these settings, press and hold the Recall button for 3 seconds.
If you want to clear the current copy settings and return the CX6500 to its default
settings, press and hold the Reset button for 3 seconds.
button to enter Copy Mode.
button (to make color copies) or the x
or Copy Layout setting (see "Copy Layout" on
2-up 4-up
Paper type
Menu selection buttons
B&W
Reduce/enlarge
Paper size
Changing Copy Settings
button (to
Number of copies
13