Vivotek VS8100 User Manual page 95

VIVOTEK
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the preset threshold.
Percentage = 30%
If you want to configure other motion detection settings for day/night/schedule mode (e.g., for a different
lighting condition), please click on Profile to open the Motion Detection Profile Settings page as shown
below. Another three motion detection windows can be configured on this page.
Video(TCP-AV)
2010/12/10 17:08:56
2013/2/3 14:39:12
hallway
Please follow the steps beolw to set up a profile:
1. Create a new motion detection window.
2. Check Enable this profile.
3. Select the applicable period of time for the Schedule mode. Please manually enter a range of time.
4. Click Save to enable the settings and click Close to exit the page.
This motion detection window will also be displayed on the Event Settings page. You can go to Event >
Event settings > Trigger to select it as a trigger source. Please refer to page 82 for detailed information.
User's Manual - 95