Vivotek VS8100 User Manual page 134

VIVOTEK
7.17 camera PTZ control
Group: camctrl (capability.camctrl.httptunnel > 0)
NAME
enableptztunnel
Group: camctrl_c<0~(n-1)> for n channel product
NAME
panspeed
tiltspeed
zoomspeed
focusspeed
preset_i<0~(npreset-1)
>_name
preset_i<0~(npreset-1
)>_ dwelling
uart
cameraid
isptz
disablemdonptz
patrolseq
134 - User's Manual
VALUE DEFAULT
<boolean> 0
VALUE DEFAULT
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
string[40] <blank>
0 ~ 999 0
0 ~ (m-1), m 0
is UART
count
0~255 1
0 ~ 2 0
<boolean> 0
string[120] <blank>
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
SECURITY DESCRIPTION
(get/set)
1/4 Enable HTTP tunnel for
camera control.
(capability.ptzenabled)
SECURITY DESCRIPTION
(get/set)
1/4 Pan speed
1/4 Tilt speed
1/4 Zoom speed
1/4 Auto focus speed
1/4 Name of the preset location.
1/4 The dwelling time of each
preset location
1/4 Select corresponding uart
(capability.nuart>0).
1/4 Camera ID controlling external
PTZ camera.
1/4 0: disable PTZ commands.
1: enable PTZ commands with
PTZ driver.
2: enable PTZ commands with
UART tunnel.
1/4 Disable motion detection on PTZ
operation.
1/4 (For external device)
The indexes of patrol points,