Vivotek VS8100 User Manual page 160

VIVOTEK
speedzoom -5 ~ 5
speedfocus -5 ~ 5
speedapp -5 ~ 5
auto pan
patrol
stop
zoom wide
tele
stop
focus auto
far
near
iris auto
open
close
speedlink 0 ~ 4
gaptime 0~32768
return <return page>
8.9 ePTZ Camera Control
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/eCamCtrl.cgi?channel=<value>&stream=<value>
[&move=<value>] – Move home, up, down, left, right
[&auto=<value>] – Auto pan, patrol
[&zoom=<value>] – Zoom in, out
[&zooming=<value>&zs=<value>]
[&vx=<value>&vy=<value>&vs=<value>]
160 - User's Manual
Set the zoom speed.
Set the focus speed.
Set the auto pan/patrol speed.
Auto pan.
Auto patrol.
Stop camera.
Zoom larger view with current speed.
Zoom further with current speed.
Stop zoom.
Auto focus.
Focus on further distance.
Focus on closer distance.
Let the Network Camera control iris size.
Manually control the iris for bigger size.
Manually control the iris for smaller size.
Issue speed link command.
The gaptime between two consecutive ptz commands for
device. (unit: ms)
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.
(capability.eptz > 0)
– Zoom without stopping, used for joystick
– Shift without stopping, used for joystick