Vivotek VS8100 User Manual page 161

[&x=<value>&y=<value>&videosize=<value>&resolution=<value>&stretch=<value>]
image
(Move the center of image to the coordination (x,y) based on resolution or videosize.)
[ [&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>][&speedapp=<value>] ]
speeds
[&return=<return page>]
Example:
http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=0&move=right
http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=1&vx=2&vy=2&vz=2
http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=1&x=100&y=100&
videosize=640x480&resolution=640x480&stretch=0
PARAMETER VALUE
channel <0~(n-1)>
stream <0~(m-1)>
move home
up
down
left
right
auto pan
patrol
stop
zoom wide
tele
zooming wide or tele
zs 0 ~ 6
vx <integer>
vy <integer>
vs 0 ~ 7
x <integer>
y <integer>
DESCRIPTION
Channel of video source.
Stream.
Move to home ROI.
Move up.
Move down.
Move left.
Move right.
Auto pan.
Auto patrol.
Stop auto pan/patrol.
Zoom larger view with current speed.
Zoom further with current speed.
Zoom without stopping for larger view or further view with
zs speed, used for joystick control.
Set the speed of zooming, "0" means stop.
The direction of movement, used for joystick control.
Set the speed of movement, "0" means stop.
x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
VIVOTEK
– Click on
– Set
User's Manual - 161