Vivotek VS8100 User Manual page 128

VIVOTEK
s<0~(m-1)>_mjpeg_bitrate
s<0~(m-1)>_forcei
7.7 image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME
brightness
saturation
contrast
sharpness
brightnesspercent
saturationpercent
contrastpercent
sharpnesspercent
IBPE_nrenable
IBPE_nrstrength
xoffset
deinterlace_enable
deinterlace_mode
128 - User's Manual
1000~800000
0
1
VALUE DEFAULT
-5 ~ 5,100 100
-5 ~ 5,100 100
-5 ~ 5,100 100
-3 ~ 3,100 100
0 ~ 100 50
0 ~ 100 50
0 ~ 100 50
0~100 50
<boolean> 0
0 ~ 100 5
0 ~ 100 13
<boolean> 1
adaptive, adaptive
6000000 4/4
N/A 7/6
SECURITY DESCRIPTION
(get/set)
4/4 Adjust brightness of image
according to mode settings.
4/4 Adjust saturation of image
according to mode settings.
4/4 Adjust contrast of image according
to mode settings.
4/4 Adjust sharpness of image
according to mode settings.
4/4 Adjust brightness of image by
percentage.
Darker 0 <-> 100 Brighter
4/4 Adjust saturation of image by
percentage.
Less 0 <-> 100 More saturation
4/4 Adjust contrast of image by
percentage.
Less 0 <-> 100 More contrast
4/4 Adjust sharpness of image by
percentage.
Softer 0 <-> 100 Sharper
4/4 Enable noise reduction.
4/4 Adjust noise reduction strength. 0
is minimum and 100 is maximum.
4/4 Change start point of input image
in horizontal.
4/4 Enable de-interlace. This is
enabled by default.
4/4 Adaptive: Detect moving area and
Set bit rate in bps when
choosing cbr in
"ratecontrolmode".
Force I frame.