Vivotek VS8100 User Manual page 135

patroldwelling
7.18 UART control
Group: uart (capability.nuart > 0)
NAME
ptzdrivers_i<0~19,
127>_name
ptzdrivers_i<0~19,
127>_location
enablehttptunnel
Group: uart_i<0~(n-1)> n is uart port count
NAME
baudrate
databit
paritybit
stopbit
uartmode
customdrvcmd_i<0~9
>
speedlink_i<0~4>_na
me
speedlink_i<0~4>_c
string[160] <blank>
VALUE DEFAULT
string[40] <blank>
string[128] <blank>
<boolean> 0
(capability.nuart > 0)
VALUE DEFAULT
110,300,600,120 9600
0,2400,3600,480
0,7200,9600,192
00,38400,57600,
115200
5,6,7,8 8
none, none
odd,
even
1,2 1
rs485 rs485
string[128] <blank>
string[40] <blank>
string[40] <blank>
separated by ","
1/4 (For external device)
The dwelling time of each patrol
point, separated by ","
SECURITY DESCRIPTION
(get/set)
1/4 Name of the PTZ driver.
1/4 Full path of the PTZ driver.
1/4 Enable HTTP tunnel channel to
control UART.
SECURITY DESCRIPTION
(get/set)
4/4 Set baud rate of COM port.
4/4 Data bits in a character frame.
4/4 For error checking.
4/4 1
2-1.5 , data bit is 5
2-2
4/4 UART transmission mode.
1/4 PTZ command for custom
camera.
1/4 Additional PTZ command
name.
1/4 Additional PTZ command list.
VIVOTEK
User's Manual - 135