Checking That The Modem Is Present; Testing The Modem; Setting Up Network Software Components - 3Com Megahertz Series User Manual

Checking that the
Modem is Present

Testing the Modem

Setting Up Network
Software Components
4 Click the Device Manager tab. A list of devices appears, arranged by type.
5 Double-click Network Adapters. The LAN+Modem card name appears, confirming
successful installation.
6 Double-click the entry for the LAN+Modem card to display a description of the
card and its current status. The device status should indicate "This device is
working properly."
7 Click the Cancel button to return to System Properties.
8 Click OK to exit System Properties.
1 Double-click the My Computer icon.
2 Double-click the Control Panel icon.
3 Double-click the System icon. The System Properties box details your system setup.
4 Click the Device Manager tab. A list of devices appears, arranged by type.
5 Double-click Modems. It should display the entry for the FEM656B - 3Com 10-100
LAN + 56K Modem CardBus PC Card-(Modem).
6 Double-click the entry for the LAN+Modem card. It should confirm "This device is
working properly."
7 Click Cancel, then click OK to exit System Properties.
1 Open the Control Panel and double-click Modems.
2 Select the Diagnostics tab.
3 Click on the COM port assigned to the LAN+Modem card.
4 Click More Info... If the modem is working properly, the test will display a white
box with a list of AT commands. This will confirm that the modem is functioning
properly.
You will need to install four types of network components: Client, Adapter,
Protocol, and Service. These components are installed through the Network
application in the Control Panel. The Network window lists which network
components are currently installed.
Before installing network components, consult with your network manager or MIS
representative for the options you require for your network.
1 Open the Network window by double-clicking the Network icon in the Control
Panel.
2 Click Add to add new or additional network components. Your LAN+Modem card
is already installed, so you will want to add only protocols, clients, and services.

Setting Up Network Software Components

9