Opening The Casings - PEUGEOT MOTOR ENGINE Workshop Manual

Opening the casings

- Remove the casing 6 assembly nuts and bolts (1)
- Remove the engine mount (2) and the belt guard
bracket (3)
Special tooling required
- Protective cap P/N 69098
- Casing extraction and opening tool P/N 64706
- Casing opening/closing plate P/N 750369
- Casing opening/closing bush P/N 69137
+ Have handy 2 bolts Ø 5 x 40 mm
- On the RH casing, on the magneto flywheel side, fit:
- bush P/N 69137 (large diameter side)
- protector P/N 69098 on the end of the crank
assembly
Reproduction or translation, even partial, forbidden without the written consent of Peugeot Motocycles
DISASSEMBLY
Page: 14