PEUGEOT MOTOR ENGINE Workshop Manual page 36

MISCELLANEOUS OPERATIONS
Disassembly
- Remove the clutch shoes
- Tighten the support in a vice
- Position the pulley (1) on the support lining up
the sprocket teeth (2) with the support teeth (3)
- Fold down the nut locking tab (4)
- Remove the nut (5) with the wrench
- Remove the sprocket (2)
Re-assembly
Proceed in reverse order to disassembly
Fit the nut locking plate (4)
Page: 38
Reproduction or translation, even partial, forbidden without the written consent of Peugeot Motocycles