Storing Copy Settings In Memory; Storing Your Settings - Lanier 5455 Operator's Manual

Storing Copy Settings In Memory

Storing Copy Settings In Memory

All of the functions such as copy quantity, percent reduction, copy darkness, margin shift, etc.,
for frequently used copy jobs can be stored in Memory Copy.

Storing Your Settings

1
2
3
4
5
6
6 - 6
•
Recall these copy job settings in the future with the press of a button.
•
Store up to ten copy jobs in the copiers memory.
Edit the copy settings so that all of the function you want to store in this program are
selected.
Press the Program key.
Touch the Store key.
Touch the Program Number you
want to store these copy settings
to.
•
If the Program Number has
programmed setting in it, the
Program-In symbol appears
in front of the Program
Number.
•
You will be asked if you wish to overwrite it. Touch either Yes or No.
Enter the program name using
the letter keys.
•
Up to 25 character can be
used.
•
If no program name is
desired, proceed to Step 6.
Touch the OK key.
Special Copier Functions