Troubleshooting - Cisco TelePresence MX200 Administrator's Manual

Cisco TelePresence MX200 and MX300
Contents

Troubleshooting

The troubleshooting page lists the status for some common
sources of errors. The list may be different for different
products and installations * .
Note that critical issues and errors are clearly marked in red
color; warnings are yellow.
* The messages shown in the illustration serve as examples. Your
system may show other information.
D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface Web interface
Navigate to: Diagnostics > Troubleshooting
System settings
Run diagnostics
Click Re-run diagnostics
the information in the list is up-to-date.
Leave standby mode
This button is only visible when the
system is in standby mode. If in
standby mode, click
to wake up the system.
www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
43
Administrator Guide
Setting passwords Appendices
to make sure
Deactivate standby