Cisco TelePresence MX200 Administrator's Manual page 110

Cisco TelePresence MX200 and MX300
Contents
Video OSD EncryptionIndicator
Define for how long the encryption indicator (a padlock) will be shown on screen. The setting
applies to both encrypted and non-encrypted calls, i.e. both to secure and non-secure
conferences. The icon for encrypted calls is a locked padlock, and the icon for non-encrypted
calls is a crossed out locked padlock.
Requires user role: ADMIN
Value space: <Auto/AlwaysOn/AlwaysOff>
Auto: If the Conference Encryption Mode setting is set to BestEffort and the call is
encrypted, the encryption indicator is shown during the first seconds of a call. If the
Conference Encryption Mode setting is set to BestEffort and the call is non-encrypted, the
crossed out encryption indicator is shown during the entire call. If the Conference Encryption
Mode setting is NOT set to BestEffort, the encryption indicator is not shown at all.
AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies
to both encrypted and non-encrypted calls for all Conference Encryption Mode settings.
AlwaysOff: The encryption indicator is never displayed on screen. This applies to both
encrypted and non-encrypted calls for all Conference Encryption Mode settings.
Video OSD EncryptionIndicator: Auto
Example:
Video OSD MissedCallsNotification
This setting is not applicable for this product.
Video OSD AutoSelectPresentationSource
This setting is not applicable for this product.
Video OSD CallSettingsSelection
This setting is not applicable for this product.
Video OSD TodaysBookings
This setting is not applicable for this product.
Video OSD MyContactsExpanded
This setting is not applicable for this product.
D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface System settings System settings
Video OSD Output
This setting is not applicable for this product.
Video OSD InputMethod InputLanguage
This setting is not applicable for this product.
Video OSD InputMethod Cyrillic
This setting is not applicable for this product.
Video OSD LoginRequired
This setting is not applicable for this product.
Video Output LCD [1] Resolution
Set the resolution and refresh rate for the video system's LCD screen.
Requires user role: ADMIN
Value space: <1920_1080_60>
1920_1080_60: The screen resolution is 1920 x 1080, and the refresh rate is 60 Hz.
Video Output LCD 1 Resolution: 1920 _ 1080 _ 60
Example:
Video Output LCD [1] MonitorRole
Set the LCD monitor role. Do not change this setting manually; keep the default setting.
Value space: <InternalSetup>
InternalSetup: The internal setup as defined by the Touch controller will be used.
Video Output LCD [1] Brightness
Set the brightness level for the monitor.
Requires user role: ADMIN
Value space: <0..100>
Range: Select a value between 0 and 100.
Video Output LCD 1 Brightness: 50
Example:
www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
110
Administrator Guide
Setting passwords Appendices