Technical Specification - Cisco TelePresence MX200 Administrator's Manual

Cisco TelePresence MX200 and MX300
Contents

Technical specification

PRODUCT SPECIFICATION
Product compatibility
Fully compatible with standards-compliant
telepresence and video systems
Software compatibility
MX200: Cisco TelePresence Software Version
TC4.2 or later
MX300: Cisco TelePresence Software Version
TC5.0 or later
Components
Fully integrated unit including:
• Codec
• Display
• Camera
• Microphone and loudspeakers
Cisco TelePresence Table Microphone 20
(MX200 comes standard with one microphone;
MX300 comes standard with two microphones)
Cables: VGA-to-DVI-I cable, 3.5 mm jack audio
cable, LAN cable, and power cable
Display
MX200:
• LCD monitor: 42"
• Resolution: 1920 x 1200 (16:9)
• Contrast ratio: 2500:1
• Viewing angle: 178°
• Response time: 8 ms
• Brightness: 550 cd/m2
MX300:
• LCD monitor: 55"
• Resolution: 1920 x 1200 (16:9)
• Contrast ratio: 5000:1
• Viewing angle: 178°
• Response time: 10 ms
• Brightness: 450 cd/m2
D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface
PC and second-source video input
DVI-I
Supported PC input resolutions
SVGA (800 x 600) to 1080p (1920 x 1080)
Camera
• PrecisionHD camera: 1080p 4x zoom
• Resolutions: 1080p30 and 720p60
• Auto-focus
• Wide-angle 72-degree horizontal field of view
• 4x optical zoom
• Pan +/–100 degrees
• Tilt +/–25 degrees
Audio system
• Integrated full-range speaker and woofer,
wide band 100 Hz - 20 kHz
• Integrated full-range microphone
• Bluetooth ready
• Support for two Cisco TelePresence Table
Microphone 20
• RCA PC audio input
• RCA audio output
User interface
Cisco TelePresence Touch
• Eight-inch projected capacitive touch screen
• Resolution: 800 x 480
Language support
• Czech, Danish, Dutch, English, Finnish, French,
German, Hungarian, Italian, Japanese, Korean,
Norwegian, Polish, Portuguese-Brazilian,
Russian, Simplified Chinese, Spanish, Swedish,
Traditional Chinese, Turkish
System settings
Physical dimensions
MX200 with floor stand:
Height: 1429 mm / 56.3 in.
Width: 1026 mm / 40.4 in.
Depth: 602 mm / 23.7 in.
Weight: 40.2 kg / 89 lb
MX200 with table stand:
Height: 781 mm / 30.7 in.
Width: 1026 mm / 40.4 in.
Depth: 259 mm /10.2 in.
Weight: 31.5 kg / 69 lb
MX200 with wall mount:
Height: 757 mm / 29.8 in.
Width: 1026 mm / 40.4 in.
Depth: 169 mm / 6.7 in.
Weight: 30 kg / 66 lb
MX300 with floor stand:
Height: 1523 mm / 60.0 in.
Width: 1280 mm / 50.4 in.
Depth: 671 mm / 26.4 in.
Weight: 51.3 kg / 113 lb
MX300 with wall mount:
Height: 942 mm / 37.1 in.
Width: 1280 mm / 50.4 in.
Depth: 217 mm / 8.5 in.
Weight: 34.4 kg / 76 lb
Power
• Autosensing power supply
• 100–240 VAC, 50/60 Hz
• 250 W maximum
Temperature range
Operating temperature and humidity:
• Ambient temperature: 32 to 95°F
(0 to 35°C)
• Relative humidity (RH): 10 to 90%
• Storage and transport temperature at RH
10–90% (noncondensing): –4 to 140°F (–20 to
60°C)
www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
121
Administrator Guide
Setting passwords Appendices Appendices
Approvals and compliance
EU/EEC
• Directive 2006/95/EC (Low Voltage Directive)
- Standard EN 60950-1
• Directive 2004/108/EC (EMC Directive)
- Standard EN 55022, Class A
- Standard EN 55024
- Standard EN 61000-3-2/-3-3
• Directive 2011/65/EU (RoHS)
Warning: This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
USA
• Approved according to UL 60950-1
• Complies with FCC15B Class A
Note: This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and,
if not installed and used in accordance with
the instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the user
will be required to correct the interference at his
own expense.
Canada
• Approved according to CAN/CSA C22.2 No.
60950-1
• This Class A digital apparatus complies with
Canadian ICES-003
• Cet appareil numérique de la classe A est
conforme à la norme NMB-003 du Canada