Table of Contents
Advertisement
RECEIVING
Remove the saw and accessories from the shipping
carton and inspect for damage. Any damage should
be reported to your distributor and shipping agent im-
mediately.
Before proceeding further, read your instruction manual
thoroughly to familiarize yourself with proper assem-
bly, maintenance and safety procedures.
Contents of box:
1 Saw body with switch
1 Motor
1 Stand assembly
2 Extension wings
1 Blade guard
1 Motor bracket
1 Standard insert
1 Dado insert
1 Pulley cover
1 Pulley cover seat
1 Motor base plate
1 Miter gauge
2 Handwheel assemblies
INSTALLATION and ASSEMBLY
Tools required
Arbor wrench (supplied)
12mm combination wrench (supplied)
3mm and 4mm hex wrenches (supplied)
8, 10, 14, 15, and 19 mm open-end wrenches
Phillips screwdriver
Flat head screwdriver
The following are a few hints and suggestions to help
with assembly.
1.
A bowl or other container should be used to hold
the hardware.
2.
To avoid harming the table saw top, a cloth should
be placed on the floor first.
3.
Do not remove the protective wax coating from
the table until the saw is assembled.
4.
Start assembling the saw in the area where the
saw will be used. This area should be clean and tidy
in order to make it easy to find any dropped fasteners
and tools.
5.
Only unwrap the hardware packages that you are
working with.
6.
A mobile light should be used to illuminate ob-
scure areas.
7.
The use of a socket wrench with ratchets and
extensions will greatly reduce assembly time.
8
2 Splitter mount brackets
1 Pin
4 Foot assemblies
1 Small pin
2 Spacers
1 Belt
1 Dust Shroud
1 Arbor wrench
1 Combination wrench
2 Hex wrenches
2 Hardware bags
1 Manual
1 Warranty card
Hide quick links:
Advertisement
Table of Contents
