Operation Manual – VLAN
H3C S5500-EI Series Ethernet Switches
1.1.3 VLAN Classification
Based on how VLANs are established, VLANs fall into different categories. The
following types are the most commonly used:
Port-based
MAC address-based
Protocol-based
IP-subnet-based
Policy-based
Other types
The
S5500-EI
address-based VLAN, protocol-based VLAN, and IP-subnet-based VLAN.
1.2 Configuring Basic VLAN Attributes
Follow these steps to configure basic VLAN attributes:
Enter system view
Create VLANs
Enter VLAN view
Specify a descriptive
string for the VLAN
series
Ethernet
To do...
system-view
vlan { vlan-id1 [ to
vlan-id2 ] | all }
vlan vlan-id
description text
switches
support
Use the command...
1-4
Chapter 1 VLAN Configuration
port-based
VLAN,
Remarks
—
Optional
Using this command can
create multiple VLANs in
a bulk.
Required
If the specified VLAN
does not exist, the
command creates the
VLAN and then enters its
view.
By default, only the
default VLAN (that is,
VLAN 1) exists in the
system.
Optional
VLAN ID used by default,
for example, "VLAN 0001"
MAC