Telnet Configuration With Authentication Mode Being Scheme - H3C S5500-EI series Operation Manual

Operation Manual – Login
H3C S5500-EI Series Ethernet Switches
[H3C-ui-vty0] history-command max-size 20
# Set the timeout time to 6 minutes.
[H3C-ui-vty0] idle-timeout 6
3.4 Telnet Configuration with Authentication Mode Being
Scheme
3.4.1 Configuration Procedure
Enter system view
Enable the Telnet
server function
Configure
the
authentic
ation
scheme
Create a local user and
enter local user view
Set the authentication
password for the local
user
Specify the service
type for VTY users
Quit to system view
Enter one or more VTY
user interface views
To do... Use the command...
system-view
telnet server enable
Enter the
default
ISP domain Domain name
domain
view
authentication default
Configure
{ hwtacacs-scheme
the AAA
hwtacacs-scheme-
scheme to
name [ local ] | local |
be applied
none | radius-scheme
to the
radius-scheme-name
domain
[ local ] }
Quit to
system quit
view
local-user user-name
password { simple |
cipher } password
service-type telnet
[ level level ]
quit
user-interface vty
first-number
[ last-number ]
Chapter 3 Logging In Through Telnet
—
Required
Optional
By default, the local AAA
scheme is applied. If you
specify to apply the local AAA
scheme, you need to perform
the configuration concerning
local user as well.
If you specify to apply an
existing scheme by providing
the radius-scheme-name
argument, you need to perform
the following configuration as
well:
No local user exists by default.
Required
Required
—
—
3-10
Remarks
Perform AAA-RADIUS
configuration on the switch.
(Refer to
AAA-RADIUS-HWTACACS
module for more.)
Configure the user name
and password accordingly
on the AAA server. (Refer to
the user manual of AAA
server.)
the