Using A Static Ip With A Dsl/Cable Modem - D-Link DI-304 User Manual

DI-304ISDN Remote Router
ISDN Dial Backup Setup
PPP Setup

Using a Static IP with a DSL/Cable Modem

Select this access mode if you receive a fixed public IP address or a public subnet
from your DSL or Cable ISP. In most cases, a Cable ISP will provide a fixed public
IP, while a DSL ISP will provide a public subnet. You must enable IP Routing
Usage, and enter the fixed public IP or choose one public IP from the public subnet
for Ethernet TCP/IP Setup.
♦
Scheduler (1-15) – Enter up to 4 index numbers for calls that have been
previously configured on the Call Schedule Setup windows (under
Advanced Setup).
♦
Dial Backup Mode – Select None to disable this feature or select Packet
Trigger to activate this feature.
♦
PPP Authentication – Select PAP or CHAP for widest compatibility.
♦
Idle Timeout – Idle timeout means the router will disconnect after being
idle for a preset amount of time. The default is 180 seconds. If you set the
time to 0, the PPP session will not terminate itself.
♦
Fixed IP – Check No (Dynamic IP) unless your ISP has provided you
with a static IP address.
♦
Fixed IP Address – If your ISP has provided you with a static IP address
enter it here.
34