Out-Of-Range Results; Comparing Glucose Meter Test Results With Laboratory Results - iHealth Gluco-Monitoring System Owner's Manual

App on your iOS device:
Step 1: Launch the app.
Step 2: Tap the CTL button to switch to control (CTL) mode.
Step 3: Follow Steps 3-4 above in section [1].
Step 4: The control solution test result will appear on the app
on your iOS device.

Out-of-Range Results

Results falling outside the speci ed range may be caused by:
•
An error in the test
•
Expired or contaminated control solution
•
An expired or contaminated test strip
•
Meter malfunction
If you continue to get control solution test results that fall
outside of the range printed on the vial, the meter may not be
working properly. Discontinue use and call iHealth Labs
Customer Service at 1-855-816-7705 for assistance.
To purchase additional control solution, call iHealth Labs
Customer Service.
NOTE:
•
Do not use expired control solution.
•
The control solution range printed on the test strip vial is for
control solution use only. It is not a recommended range for
your blood glucose level.
COMPARING GLUCOSE METER TEST RESULTS WITH LABORATORY
RESULTS
The iHealth system provides you with whole blood equivalent
results. The result you obtain from your glucose meter may di er
somewhat from your laboratory results due to normal variation.
The iHealth system results can be a ected by factors and
conditions that do not a ect laboratory results in the same way.
To make an accurate comparison between the iHealth system
and laboratory results, follow the guidelines below.
19