Important Information About Control Solution Tests; Performing A Control Solution Test - iHealth Gluco-Monitoring System Owner's Manual

•
Your AST results do not match the way you feel
•
Your routine glucose results uctuate often

IMPORTANT INFORMATION ABOUT CONTROL SOLUTION TESTS

Control solution contains a known amount of glucose that reacts
with test strips and is used to check that your meter and test
strips are working together properly.
Materials needed to perform a control solution test:
•
iHealth Blood Glucose Meter(the meter)
•
iHealth Test Strip
•
iHealth Control Solution
Perform a control solution test when:
•
First receiving or purchasing the meter
•
Checking the meter and test strips (which should be done at
least once a week)
•
Using a new vial of test strips
•
You suspect the meter or test strips are not working properly
•
Your blood glucose test results are not consistent with your
expectation, or you think the results are not accurate
•
Practicing the testing process
•
The meter has been dropped or damaged

PERFORMING A CONTROL SOLUTION TEST

[1] When the meter is not connected to your iHealth Gluco-Smart
App on your iOS device:
Step 1: Turn on the control solution test (CTL) mode.
Insert the test strip into the meter's strip port to turn on the
meter. When the blood sample symbol appears on the meter
display, press the memory button to turn on the CTL mode.
When the CTL symbol appears, the meter is in control solution
test mode and will not save this test result in memory.
17