Online Measurement Mode：(With Ios Device); Reference Value Of The Ihealth Wireless Smart Glucose Meter; Comparing Glucose Meter Test Results With Laboratory Results; Before Going To The Lab - iHealth BG5 Owner's Manual

Online measurement mode：(with iOS device)
Press and hold the Memory Button for 3
seconds to turn the meter on. Enable the
Bluetooth function on your iOS device.
When the " " symbol appears, the meter
is in Bluetooth communication mode.
You may perform a test even when the
meter is not connected to your iOS device
via Bluetooth, and the meter will save up to
500 test results. launch the App and follow the on-screen
instructions. Test results will be transmitted to the App with
date and time. If the Bluetooth function disconnected, the
meter will automatically shut off.
REFERENCE VALUE OF THE IHEALTH WIRELESS SMART
GLUCOSE METER
Time of day
Fasting and before meals
2 hours after meals
Source: (1) American Diabetes Association: Diagnosis and
Classification of Diabetes Mellitus (Position Statement).
Diabetes Care 34 (Supp. 1) S66, 2011.
(2) Tietz Fundamentals of Clinical Chemistry, 6th Edition,
Edited by Burtis CA and Ashwood ED, W. B. Saunders Co.,
Philadelphia, PA, 2008, p. 849.
Please consult your healthcare provider to determine a
target range that is best for you.
COMPARING GLUCOSE METER TEST RESULTS WITH
LABORATORY RESULTS
The Wireless Smart Glucose Meter provides you with whole
blood equivalent results. The result you obtain from your
People without diabetes
<110 mg/dL
<140 mg/dL
18
glucose meter may differ somewhat from your laboratory
results due to normal variation. The Wireless Smart Glucose
Meter results can be affected by factors and conditions that
do not affect laboratory results in the same way. To make an
accurate comparison between the Wireless Smart Glucose
Meter and laboratory results, follow the guidelines below.

Before Going to the Lab

• Perform a Control Solution test to make sure that the meter
is working properly.
• If possible, fast for at least eight hours before conducting a
comparison test.
• Take your Wireless Smart Glucose Meter with you to the lab.

While at the Lab

Make sure that samples for both tests are taken and tested
within 15 minutes of each other.
• Wash your hands before obtaining a blood sample.
• Never use your glucose meter with blood samples
collected in a test tube.
• Use fresh capillary blood only.

CLEANING AND DISINFECTION

The cleaning and disinfection is absolutely necessary for the
test procedure, because cleaning can insure the meter works
well (for example, display will be clear to see after cleaning);
and disinfection can avoid the infection to you or to the
other people, and the cross-infection.
We strongly warn that the protective cover is needed when
use the iOS device to test the blood glucose , the meter and
lancing device should be cleaned and disinfected following
use. And we suggest you use the following product:
CaviWipes (EPA registration number ：46781-8).
The CaviWipes, with Isopropanol and Diisobutyl-phenoxy-
19