Data Syncing; Reviewing Saved Test Results On The Meter - iHealth Gluco-Monitoring System Owner's Manual

NOTE: The results obtained from the glucose meter are plasma-
calibrated. This helps you and your physician or other quali ed
healthcare providers to compare your meter results with
laboratory tests. Refer to the instructions given by your physician
or other quali ed healthcare providers.Do not deviate from
these instructions on the basis of the result without rst
consulting your physician.
[8] Discard the used test strip and lancet.
Remove the used test strip from the meter
using a small amount of tissue paper.
Discard the used test strip and lancet
properly. (Tip: Prior to disposal, stick the
lancet into the cover.)

DATA SYNCING

The meter can save up to 500 of the most recent blood glucose
test results. When the meter needs to save a new test result and
has already stored 500 test results, the oldest test result will be
overwritten by the new test result.
When the meter is connected to the app on your iOS device, tap
the "Upload" button to upload the saved data from the meter to
the app.

REVIEWING SAVED TEST RESULTS ON THE METER

Press the memory button to view the test results stored in the
meter. The rst reading you'll see is your most recent blood
glucose result. To review earlier test results, press the memory
button repeatedly.
12