Signs Of Potential Physical And Performance Deterioration - iHealth Gluco-Monitoring System Owner's Manual

1. After a test, clean and wash your hands.
2. Use one CaviWipe to carefully clean the meter, front and back.
3. Then, disinfect the meter with another wipe and allow the
surface to dry naturally: this should take approximately 2
minutes.
4. Use the same method with the CaviWipes to clean and
disinfect the lancing device.
Note:
j Each disinfection step requires a pre-cleaning step. Wash
hands thoroughly with soap and water after handling the
meter, lancing device, or test strips.
k Only the surface of the meter can be cleaned and
disinfected with the disinfecting towelette. Do not insert the
disinfecting towelette into the test strip port , or else the
performance of the meter may be a ected.
SIGNS OF POTENTIAL PHYSICAL AND PERFORMANCE
DETERIORATION
If you encounter one of the following circumstances, stop using
the meter and contact local customer services or the place of
purchase for assistance, or call the toll free customer service
number1-855-816-7705:
14