Settings For The Audio (Audio Menu) - Sony STR-DH700 Operating Instructions Manual

• SR ID (SIRIUS radio ID)
Lets you check the SIRIUS Radio ID. For
details, see "Checking the SIRIUS Radio ID"
(page 67).
Settings for the audio
(AUDIO menu)
You can use the AUDIO menu to make
settings for the audio to suit your preference.
Select "5-AUDIO" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 40) and
"Overview of the menus" (page 41).
AUDIO menu parameters
• DEC. PRI. (Digital audio input
decoding priority)
Lets you specify the input mode for the digital
signal input to the DIGITAL IN and HDMI IN
jacks.
• DEC. PCM
When signals from the DIGITAL IN jack are
selected, PCM signals are given priority (to
prevent interruption when playback starts).
However, when other signals are input, there
may be no sound, depending on the format.
In this case, set this item to "DEC. AUTO".
When signals from the HDMI IN jack are
selected, only PCM signals are output from
the connected player. When signals in any
other format are received, set this item to
"DEC. AUTO".
• DEC. AUTO
Automatically switches the input mode
between DTS, Dolby Digital, or PCM.
Note
When set to "DEC. AUTO" and the sound from the
digital audio jacks (for a CD, etc.) is interrupted
when playback starts, set to "DEC. PCM".
-
»
3
"0
~
iii"
. .
o
"0
CD
~
-
o ·
~
(J)
continued------
49 US