Sony STR-DH700 Operating Instructions Manual page 37

Namlnglpput'f:'
, . ,
~f,.:,~'
You can enter a name of up to 8 characters for
inputs and display it on the receiver's display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
"I-LEVEL" appears on the display.
3
Press +/+ repeatedly to select
"7-SYSTEM".
4
Press
8
or. to enter the
menu.
5
Press +/+ to select "NAME IN".
6
Press
8
or. to enter the
parameter.
The cursor flashes and you can select a
character.
7
Press +/+ to select a character,
then press ./. to move the
cursor to the next position.
If you made a mistake
Press +1+ until the character you want to
change flashes, then press
+1+
to select
the correct character.
Tips
- You can select the character type as follows
by pressing
./+.
Alphabet (upper case) -. Numbers-.
Symbols
-To enter a blank space, press. without
selecting a character.
8
Press
8.
The name you entered is registered.
37 US