Sony STR-DH700 Operating Instructions Manual page 88

5
Press
8
or .. to enter the
parameter.
6
Press
+1+
repeatedly to select
the setting you want.
• STBY OFF: You cannot enjoy the
S-AIR receiver while the S-AIR main
.unit is in standby mode.
• STBY ON: You can enjoy the S-AIR
receiver while the S-AIR main unit is in
standby mode or turned on.
To exit the menu
Press AMP MENU.
Notes
• When you set "STANDBY" to "STBY ON", the
power consumption increases during the standby
mode.
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set "STANDBY".
• When the wireless transmitter is removed from the
S-AIR main unit, "STANDBY" is set to "STBY
OFF" automatically.
• If you have selected TUNER (FMIAM band) on
the S-AIR main unit before you tum it off and
"STANDBY" is set to "STBY ON", you can only
select the same band for the tuner on the S-AIR
recei ver. However, you can select input other than
TUNER on the S-AIR receiver.
• The sound of the S-AIR recei ver may be cut off by
operation of the S-AIR main unit.
88
US
-,
Other Operations
Switching between
digital and analog audio
(INPUT MODE)
When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1
Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
• AUTO .
Gives priority to digital audio signals when
there are both digital and analog
connections.
If there are more than one digital connection,
HDMI audio signals have priority over
COAXIAL and OPTICAL audio signals.
If there are no digital audio signals, analog
audio signals are selected.
• COAX
Specifies the digital audio signals input to
the DIGITAL COAXIAL jack.
• OPT
Specifies the digital audio signals input to
the DIGITAL OPTICAL jack.
• ANALOG
Specities the analog audio signals input to
the AUDIO IN (L/R) jacks.