4A: Connecting The Audio Components - Sony STR-DH700 Operating Instructions Manual

-
.
.
AUDIO AUDIO
IN OUT
Super Audio CD
player/CD player/
CD recorder
The following illustration shows how to
connect a Super Audio CD player, CD player
or CD recorder.
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
After connecting your audio component,
proceed to "4b: Connecting the video
components"(page 22).
4a: Connecting the audio
components
gillnf!M
:; ,,;t ) ,Ii;;;;
',LIM' "';
Tips
• To output the sound of the TV from the speakers
connected to the receiver, be sure to
- connect the audio output jacks of the TV to the
TV IN jacks of the receiver.
- tum off the TV's volume or activate the TV's
muting function.
• All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Notes
• Be sure to tum on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
o
Audio cord (not supplied)
21
US