Sony STR-DH700 Operating Instructions Manual page 87

(For the S-AIR receiver only (not
supplied»
You can enjoy the S-AIR receiver while the
S-AIR main unit is in standby mode by setting
"STANDBY" to "STBY ON".
-
Input
buttons
'T~(~~~T
D
"",,0
VIDE01 VIDE02
0 0 0
SAT TV SA·COIeD TUNER .
;080'0
8.
+1+1.1.
Enjoying the S-AIR
receiver while the S-AIR
main unit is in standby
mode
To exit the menu
Press AMP MENU.
Notes
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set "RF SETUP".
• In most cases, you will not need to change this
setting.
• If "RF SETUP" is set to "RF OFF," transmission
between the S-AIR main unit and S-AIR sub unit
can be performed using one of the following
channels.
- S-AlR ID A: equivalent channel for Wi-Fi
channel I
- S-AlR ID B: equivalent channel for Wi-Fi
channel 6
- S-AlR ID C: equivalent channel for Wi-Fi
channel II
• The transmission may be improved by changing
the transmission channel (frequency) of the other
wireless system(s). For details, refer to the
operating instructions of the other wireless
system(s).
6
Press
+'+
repeatedly to select
the setting you want.
• RF AUTO: Normally select this. The
system changes "RF SETUP" to "RF
ON" or "RF OFF" automatically.
• RF ON: The system transmits sound by
searching the better channel for
transmitting.
• RF OFF: The system transmits sound by
fixing the channel for transmitting.
1
Press AMP MENU.
"I-LEVEL" appears on the display.
2
Press
+,+
repeatedly to select
"9- S-AIR".
3
Press
8
or .. to enter the
menu.
4
Press
+'+
repeatedly to select
"STANDBY".
continued------
87 US