Canon imageRUNNER C5051 ADVANCE Maintenance Manual page 146

# 853
Cause 1 When trying to print a large number of pages, the job is not performed due to insufficient memory resources.
Remedy Reduce the number of pages to print, or perform the print job again when no other jobs are reserved.
Cause 2 The job could not be processed, because it was cancelled from the printer driver while the print data was being sent to the
machine.
Remedy Try printing again.
Cause 3 The spool memory is full when Use Spooler in Network Settings in Preferences (from the Settings/Registration screen) is set to
'On' , therefore, data received from the host could not be spooled.
2
Remedy Set Use Spooler in Network Settings in Preferences (from the Settings/Registration screen) to 'Off' , and try sending the print
data again. (See e-Manual > Network.)
Cause 4 The maximum number of receivable data exceeds the receive limit.
Remedy Try printing the documents again after all current jobs are complete. If you still cannot print, check the sent data.
Cause 5 The number of secured documents exceeded the maximum limit that can be reserved at a time.
Remedy Print or erase the secured documents that are stored in the machine, and try printing again. (See e-Manual > Print.)
# 854
Cause Device information could not be delivered because the client machine has Restrictions for Receiving Device Info. in Device
Information Delivery Settings in Management Settings (Settings/Registration Screen) set to 'On' .
Remedy Try delivering device information again after setting Restrictions for Receiving Device Info. in Device Information Delivery
Settings in Management Settings (from the Settings/Registration screen) to 'Off' . (See e-Manual > Security.)
2-74
List of Error Messages