Attaching To The Camera - Sony DXF-C50WA Operating Instructions Manual

Electronic viewfinder sony dxf-c50wa

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

(attention) indicator (amber)

This indicator lights up when the shutter switch of the

camera is set to ON, or gain is over 3 dB.

Certain models allow you to specify the operating

conditions under which the

details, refer to the operating instructions for the camera.

l POWER switch

Turns off the power of the viewfinder and goes into a

power-saving mode when SAVE is selected.

m ASSIGN. (assignable) switches

Can be used to store frequently used functions.

The switch above is the ASSIGN. 1 switch, and the one

below is ASSIGN. 2.

Storing a function is done using "ASSIGN.1" or

"ASSIGN.2" in the FUNCTION menu.

n MENU switch

Displays the menu. Use with the MENU SEL control to

set various functions.

When the menu is not displayed and this switch is pressed

and held for three seconds or more, "VR LOCK" appears.

This locks the BRIGHT, CONTRAST, and PEAKING

controls at their current settings, preventing accidental

operation. To unlock the controls, press this switch for

three seconds or more again so that "VR UNLOCK"

appears.

For details on operations, see "Using the Menu" on page

36.

o MENU SEL (menu selection) control

Turn the control to select a menu item, and then press the

control to confirm the selection. Use with the MENU

switch to set various functions.

When the menu is not displayed, pressing this control

shows the status information of the viewfinder on the

screen.

For details on operations, see "Using the Menu" on page

36.

indicator lights up. For