Sony DXF-C50WA Operating Instructions Manual page 43

Page Menu Item
11 AUTO ADJUST
LEVEL ADJUST
AUTO SETUP
COLOR BARS
GAIN Y
GAIN PB/CB
GAIN PR/CR
a)
If "ASSIGN. 1" or "ASSIGN. 2" in the FUNCTION menu is set
to "MAG," the magnified section changes in the sequence CNT
t UPPER t RIGHT t LOWER t LEFT when the
respective switch is held down during a magnified display.
b)
A measuring instrument is required to adjust the color
temperature.
Changing the BIAS adjustment value alters the GAIN
adjustment value and vice versa. Repeat the adjustment
procedure several times until a sharp focus is obtained.
c)
Output level cannot be adjusted when any other setting than
"AUTO" is selected in "AUTO ADJUST."
Settings
(default in [ ])
For SD signal input
[AUTO]/PRST 1/
PRST 2/PRST 3
For HD signal input
[AUTO]/PRST
– – –/[EXEC]
7575/10075/100/
SMPTE/MULTI/
[AUTO]
c) –99 to [0] to 99
c) –99 to [0] to 99
c) –99 to [0] to 99
Function
For adjusting the output level of the camera automatically
(AUTO). Otherwise, for selecting a preset's adjustable value
manually (PRST 1/PRST 2/PRST 3).
Normally selecting "AUTO" is recommended.
Presets are available on the following cameras:
PRST 1: DXC series
PRST 2: DSR series
PRST 3: PDW series
For adjusting the output level of the camera automatically
(AUTO). Otherwise, for selecting a preset's adjustable value
manually (PRST).
Normally selecting "AUTO" is recommended.
Preset is available on the following cameras:
PRST: HXC-D70 series
For executing automatic adjustment of output level when
"AUTO" is selected in "AUTO ADJUST."
Note
Before executing "AUTO SETUP," input the built-in color bar of
the camera to the viewfinder, and set the camera not to display the
characters or the markers.
For recognizing the type of color bar automatically (AUTO),
or selecting manually (7575/10075/100/SMPTE/MULTI).
For making fine adjustments to the brightness level (Y)
manually.
For making fine adjustments to the color difference level
(Pb/Cb) manually.
For making fine adjustments to the color difference level (Pr/
Cr) manually.
43
Using the Menu