Advertisement
Attaching the Viewfinder
to the Camera
Attach the V-shaped shoe attachment (supplied) to the top
of the camera, then attach the viewfinder to the V-shaped
shoe attachment.
Notes
• Before attaching the viewfinder to or removing it from a
camera, always be sure to lock the viewfinder in the
standard position.
• Before removing the viewfinder from the camera, be
sure to lock the tilt lock of the tripod. Grasp the
viewfinder firmly when removing it, and be careful not
to drop it or the camera.
For more information about adjusting the viewfinder
position, see "Adjusting the Position" on page 24.
1
Remove the four plastic caps, then use the supplied
hexagonal key and the hexagonal socket head screws
(4×12, four screws supplied) to attach the supplied V-
shaped shoe attachment to the top of the camera.
2
Push the tilt-lock/friction adjustment lever towards
the camera lens to lock the viewfinder.
Mount the viewfinder firmly in the V-shaped shoe
attachment.
Plastic cap
Hexagonal socket
head screw
(4×12, supplied)
V-shaped shoe
attachment (supplied)
There is an audible click when the viewfinder snaps
into the attachment.
3
Connect the viewfinder's camera connector to the
camera's viewfinder connector using the supplied
connecting cable.
Clamp the connecting cable in the cable clamper as
shown in the following figure.
Cable clamper
Removing the viewfinder
Push the tilt-lock/friction adjustment lever towards the
camera lens to lock the viewfinder.
Remove the viewfinder from the attachment by pushing
the button while pulling the lever.
Lever
Attaching the Viewfinder to the Camera
CAMERA
connector
To the camera's
viewfinder connector
Button
23
Advertisement
Chapters
