Sony DXF-C50WA Operating Instructions Manual page 40

Page Menu
04 MAGNIFICATION
05 GUIDE FRAME
40
Using the Menu
Item Settings
(default in [
MAGNIFICATION [OFF]/ON
[MODE1]/MODE2/
MODE SEL
MODE3
[CNT]/UPPER/
MAG POSITION
RIGHT/LOWER/
LEFT
DISPLAY LEFT/[RIGHT]
POSITION
AUTO RELEASE [AUTO]/MAN
Displays the horizontal/vertical line
guide frame. The right illustration
shows the "3X3" setting under
"PATTERN SEL."
GUIDE FRAME [OFF]/ON
PATTERN SEL [3X3]/5X5/9X9
[W]/R/G/B/YL
COLOR
LEVEL 1 to [5] to 10
Function
])
For selecting normal display (OFF) or magnified display
(ON).
Normal display (OFF) is selected whenever the power is
turned on.
For selecting a magnification mode.
For selecting the area to magnify when the magnification
mode is enabled.
The "MAG POSITION" settings are linked to the
"POSITION" settings of the PEAKING menu.
CNT: Magnifies the center area
UPPER: Magnifies the upper area
RIGHT: Magnifies the right area
LOWER: Magnifies the lower area
LEFT: Magnifies the left area
For selecting the magnified display (sub display) position.
LEFT: Displays the sub display in the lower left of the
screen
RIGHT: Displays the sub display in the lower right of the
screen
For specifying the manner in which the magnified display
returns to normal display.
AUTO: After the magnified display appears by pressing
ASSIGN. 1 switch or ASSIGN. 2 switch, the display
returns to normal automatically after about five
seconds
MAN: After the magnified display appears by pressing
ASSIGN. 1 switch or ASSIGN. 2 switch, the display
returns to normal when ASSIGN. 1 switch or ASSIGN.
2 switch is pressed again
For selecting normal display (OFF), or display with guide
frame (ON).
For selecting the guide frame cell pattern.
For selecting the guide frame color.
For setting the guide frame display level. Increasing the
value brightens the guide frame display.