Operation - Nordson A7A Product Manual

Installation
(contd.)

Operation

1998 Nordson Corporation
All rights reserved
Make sure the spray area floor is conductive to ground and that the
operator's platform is grounded.
Use only designated lifting points or lugs to lift and move heavy
equipment. Always balance and block loads when lifting to prevent
shifting. Lifting devices must be inspected, certified, and rated for a
greater weight than the equipment being lifted.
Do not use unapproved fluid hoses. Solvents may cause them to
deteriorate rapidly which may allow flammable or pressurized material
to escape.
Protect components from damage, wear, and harsh environmental
conditions.
Allow ample room for maintenance, material supply container drop-off
and loading, panel accessibility, and cover removal.
Protect equipment with safety devices as specified by applicable
safety regulations.
If safety devices must be removed for installation, install them
immediately after the
work is completed and check them for proper functioning.
Only qualified personnel, physically capable of operating the equipment
and with no impairments to their judgement or reaction times, should
operate this equipment.
Read all component manuals before operating this equipment. A
thorough understanding of system components and their operation will
help you operate the system safely and efficiently.
Use this equipment only in the environments for which it is rated. Do
not operate this equipment in humid, flammable, or explosive
environments unless it has been rated for safe operation in these
environments.
Before starting this equipment, check all safety interlocks,
fire-detection systems, and protective devices such as panels and
covers. Make sure all devices are fully functional. Do not operate the
system if these devices are not working properly. Do not deactivate
or bypass automatic safety interlocks, locked-out electrical
disconnects, or pneumatic valves.
107 966E
Issued 1/98
A7A Airless Spray Gun
Manual 4-6
5