Detail Of Carriage Arm; Right Side View - US Cutter Copam User Manual

Detail of Carriage Arm

Right Side View

Blade/Pen Carriage
Slot
Locking Knob
Parallel Cable Port*
Serial (COM) Cable
Port*
USB Cable Port*
Power Cable Port
Power Switch
*Only one of the connection cables should be used to
connect the cutter to a computer.
Holds the Blade or Pen
Carriage in place.
Allows access to the
Blade/Pen Carriage Slots for
exchanging/replacing
Carriages.
Used to connect a
parallel cable from the
cutter to a computer.
Used to connect a serial
cable from the cutter to
a computer.
Used to connect a USB
cable from the cutter to
a computer.
Used to connect a
power cable from the
cutter to a wall outlet
or surge protector.
Main power switch for
turning the power of
the cutter on(1) or
off(0).
- 5 -