US Cutter Copam User Manual page 34

The "Convert Image to monochrome" window will appear.
Now you can adjust the Threshold Level slider. Where you place the slider will determine how much of
the image will be included in the monochrome conversion (which is to become the image that will be cut).
Anything darker than the level set on the Threshold slider will be included in the cut and anything lighter
will not.
Since we chose an image with good contrast and separation for our example this process will be easy. We
simply check that our image to be cut shows up in light grey or black and that there are no areas of the
background or other parts of the image that are unnecessarily included.
Now press the OK button on the "Convert Image to monochrome" window.
Now to convert a monochrome image to a vector, select "Vectorise" from the Image drop down menu.
- 33 -