Pause Screen - US Cutter Copam User Manual

Pause Screen

The Pause Screen is accessed by pressing the pause button while to cutter is cutting. From the Pause
Screen you can enter the Setup Screen to change the main settings of the cutter, cancel the current cut, or
exit the pause screen and continue cutting. You can also move the loaded material forwards or backwards, though
doing so after a cut has begun is not recommended.
Setup: Enters the Setup Screen (page 9). Allows to you to change the cutters main settings. If a test cut is
made from the Setup Screen the current cut will be canceled.
Abort: Cancels the current cut and returns to the Function Select Screen (Page 8). When you cancel a cut
from the cutter, you should also be sure to cancel the cut from the cutting software on your computer.
Pause Button Exits the Pause Screen and resumes the current cut.
Left/Right Selects between the „Setup‟ and „Abort‟ options.
Arrow Buttons
Enter Button Confirms the selection between „Setup‟ and „Abort‟
Up/Down Moves the loaded media forwards and backwards similar to the Up/Down arrow buttons
Arrow Buttons on the Jog Screen (page 10). Moving the material after a cut has started is not recommended.
- 11 -