Relationship With The Authorities; Technical Data - Jøtul S 16 C/W- I 80 Installation And Operating Instructions Manual

ENGLISH
Table of contents
1.0 Relationship with the authorities ................. 14
2.0 Technical data ................................................. 14
3.0 Requirements for installation ....................... 15
4.0 Adjustment and treatment .......................... 15
5.0 Assembly ........................................................16
6.0 Once the fireplace is complete ...................... 17
Figures ....................................................................23
14
1.0 Relationship with the
authorities
Installation of a fireplace must be according to local codes and
regulations in each country.
All local regulations, including those that refer to national and
European standards, shall be complied with when installing the
product.
Installation instructions for the surround are included.
Installation and user instructions for the insert are enclosed with
the product. For safety precautions, day-to-day use, maintenance,
servicing, etc., please see this document.
A product data label in heat resistant material is located on the
heat shield at the back of the insert. This contains information
about identification and documentation for the product.

2.0 Technical data

See fig. 1A+1B+1C
The surround is adapted to suit the
Jøtul I 80 Maxi Harmony/Panorama
Weight surround Jøtul S 16 C:
Weight surround Jøtul S 16 W:
Weight insert, ca.:
Total weight with Jøtul I 80 Maxi:
Height with Jøtul I 80 Maxi:
Width:
Depth:
Height floor/top smoke outlet w/Jøtul I 80 Maxi:
When using a steel chimney, an offset pipe of 50 mm must be
installed.
209 kg
232 kg
132 kg
364 kg
2450 mm
1000 mm
700 mm
1200 mm