To Set Up The Name And Colour Of A Vca/Pop Group - Midas XL8 Quick Reference Manual

26

To set up the name and colour of a VCA/POP group

You can change the default name of a VCA/POP group and configure the backlight
colour of its group select button to suit your own preference. This is done via the GUI
and also using the keyboard under the output bay.
1
This button takes you to the
VCA Groups screen, where
you can also assign
input/output group members
4
3c
3b
1
Click on home (top left-hand corner of screen) to obtain the GUI menu.
2
Select Population Groups and then Group Sheet from the menu options; this will take you to the Groups
Sheet screen.
3
Choose a pre-configured name from the drop-down list by:
a) Clicking on the 'pencil' icon.
b) Dragging the slider to scroll the list up and down to view all of the names.
c) Clicking on the name of your choice, for example, "Ride".
4
Alternatively, you can type in a new name for your VCA group. Do this by clicking in its name field - a white
flashing cursor will appear at the end of the current name - and typing in its new name via the keyboard
(maximum six characters). The keyboard pulls out from underneath the output bay.
5
Assign a backlight colour to the VCA group select button and background of name field on GUI by:
a) Clicking on the palette icon.
b) Clicking on your chosen colour to select it, for example, blue.
2a
5a
3a
5b
Chapter 3: Getting Started
POP groups are configured
here; the method is identical
to that used for configuring
the VCA groups
2b
Slider
Quick Reference Guide
XL8 Control Centre