Checking The Wheels; Checking And Lubricating The Cables - Yamaha XN125 2000 Service Manual

CHECKING AND LUBRICATING THE CABLES

CHECKING THE WHEELS/

EAS00168
CHECKING THE WHEELS
The following procedure applies to both of the
wheels.
1. Check:
• wheel
Damage/out-of-round → Replace.
Never attempt to make any repairs to the
wheel.
NOTE:
After a tyre or wheel has been changed or
replaced, always balance the wheel.
EAS00170
CHECKING AND LUBRICATING THE
CABLES
The following procedure applies to all of the
cable sheaths and cables.
Damaged cable sheaths may cause the cable
to corrode and interfere with its movement.
Replace damaged cable sheaths and cables
as soon as possible.
1. Check:
• cable sheath
Damage → Replace.
E
2. Check:
• cable operation
Rough movement → Lubricate.
NOTE:
Hold the cable end upright and pour a few drops
of lubricant into the cable sheath or use a suitable
lubricating device.
3-35
WARNING
WARNING
Recommended lubricant
Engine oil or a suitable cable
lubricant
CHK
ADJ