Important Information; Preparation For Removal And Disassembly; Replacement Parts; Gaskets, Oil Seals And O-Rings - Yamaha XN125 2000 Service Manual

IMPORTANT INFORMATION

EAS00020
IMPORTANT INFORMATION
PREPARATION FOR REMOVAL AND
DISASSEMBLY
1.Before removal and disassembly, remove all
dirt, mud, dust and foreign material.
2.Use only the proper tools and cleaning equip-
ment.
Refer to the "SPECIAL TOOLS".
3.When disassembling, always keep mated parts
together. This includes gears, cylinders, pis-
tons and other parts that have been "mated"
through normal wear. Mated parts must al-
ways be reused or replaced as an assembly.
4.During disassembly, clean all of the parts and
place them in trays in the order of disassem-
bly. This will speed up assembly and allow for
the correct installation of all parts.
5.Keep all parts away from any source of fire.
EAS00021

REPLACEMENT PARTS

1.Use only genuine Yamaha and MBK parts for
all replacements. Use oil and grease recom-
mended by Yamaha or MBK for all lubrication
jobs. Other brands may be similar in function
and appearance, but inferior in quality.
EAS00022

GASKETS, OIL SEALS AND O-RINGS

1.When overhauling the engine, replace all gas-
kets, seals and O-rings. All gasket surfaces,
oil seal lips and O-rings must be cleaned.
2.During reassembly, properly oil all mating
parts and bearings and lubricate the oil seal
lips with grease.
1-4
GEN
INFO