Porcelain Panel Installation - Montigo 34FIDN-S-F [NG] Installation And Maintenance Manual

Porcelain Panel Installation

The 34FID-S must only be used with the Firebox Panels installed.
With the Fireplace Door removed, the panels can be easily installed.
1). Make sure all the Porcelain Panels and fasteners are received
in good order.
Figure 7 Sec.9
Figure 8 Sec.9
2). The back of the porcelain panels have insulation. Make sure
insulation is in good order. Without insulation you may experience
pilot stability issues.
Figure 9 Sec.9
XG0508- 150204
Installation
3). The porcelain panel kit comes with replacement panel retainers.
Use if necessary. See figure for panel retainer location.
Figure 10 Sec.9
5). Carefully slide the right panel along the right side of the firebox
leaving enough room to slide the rear panel behind it. Take care
to not scratch the firebox paint.
Figure 11 Sec.9
I-Series Indoor Gas Fireplace
Page 33